Lamps with solar panels

Name: Autonomous Solar Lightning System

Model: STREETAUTO 80/24/36 (W)

Producer: «Electroniclight» Ltd.

Function: Independent Street Lighting of areas without connection to the electricity network

Main settings:

1) Power of the lighting device: from 10 to 40 W.

2) Luminous flux of 1500 to 4500 lumens per watt

3) Type of Luminous intensity distribution curve– Wide (The angle of luminous power expansion is 160?)

4) The maximum height of the luminaire suspension: 9m

5) The maximum power of the solar panel: 85 Wh

6) Battery capacity: 60A.ch (24)

7) voltage luminaire power: 24

8) Weight and Dimensions

8) Weight and Dimensions

Numberofunits

fullweight, kg

Overalldimensions, mm

1

Overalldimensions, mm

1

4,6

510х255х95

2

Self-regulating cell voltages panel

1

9

1210x525x35

3

self-regulating cell voltages panel

1

6

600x510x500

4

Storagebatterypack

1

15

1280x324x242

5

Storagebatteries

2

20,4

227x187x127

6

Controller

1

0,2

150x150x30

Device Components:

1) Street lighting with mounting bracket.

2) Solar generator unit.

3) Solar panel mounting bracket.

4) Storage battery pack

5) Storage batteries

6) System controller

7) Lamppost

Schematic diagram of the system

The system controllerconnection procedure:

1) lighting fixtures, wire 2 x 1 mm

2) Battery unit, wire 2x1 mm

3) Generator unit, 1x4 mm wire (standard 4 m)

Attention! the maximum open-circuit voltage can be up to 200 !!!

Mounting and installation.

Solar panel is to be installed in a southerly direction with a maximum deviation to the east or west up to 15 degrees.

The lamp is directed towards the desired luminous flux.

Attention! If the solar unit and lamp are needed to be installed andalimented in one direction, the unithas to be installed above the lamp!

Installation of the system with the placement of the batteries in the pit

- The minimum size of the pit for installation is 500x500x500 batteries (h).

- It`s needed to provide the installation of the cable channel to supply cables to the batteries.

- It`s needed to provide the installation of the cable channel to supply cables to the batteries.

- The pit has to be waterproof.